Hi, Sign in
LMO series fuel burner controller:
Technical performance and structural characteristics:
Intermittent operation of oil burners with forced ventilation based on microprocessor control.
LMO…/LMO24… is less than 30Kg/h.
LMO…more than 0Kg/h, and used for stationary direct-fired air heaters.
Installation Precautions:
1. The controller unit and other cables must be installed separately from the high voltage ignition cable.
2. Do not confuse phase and neutral.
3. Installation of switches, fuses, grounding, etc. must follow local regulations.
4. It must be confirmed that the maximum current allowed by the terminal is not exceeded.
5. Do not connect the main power supply to the output terminal of the combustion controller.
6. Isolate the burner controller from the mains power supply with an all-polar switch, leaving at least a 3mm contact gap.
7. Protect the ground bushing under the chassis with a metric screw and loose washer.
8. An AGK25 must be connected to terminal 3 of the controller without the use of a fan, otherwise the burner will not start reliably.
9. For safety, connect the neutral conductor to the neutral distributor or terminal 2 on the bottom of the insert block. Combustion components (fans, ignition transformers, and gas valves) are listed in Figure 7435a14 and must be connected to the neutral conductor as shown below.
10. The connection between the neutral conductor and terminal 2 is pre-wired at the bottom of the control unit.
Technical parameters of LMO series fuel burner controller:
Model | Power supply | Combustion segment | Burner capacity | Remote reset | Time | Corresponding model | |||||
ACV | TWMax | T1 | TAX | T3 | T3n | T4 | |||||
t1′Min | max | min | max | min | |||||||
LMO14.111B2 | 230 | 1 | 〈30Kg | * | 5s | 15/16s | 10s | 15s | 10s | / | LOA24.171B27 |
LMO14.113B2 | 230 | 1 | 〈30Kg | * | 5s | 15/16s | 10 | 15s | 3s | / | LOA24.173A27 |
LMO24.111B2 | 230 | 2 | 〈30Kg | * | 5s | 15/16s | 10s | 15s | 10s | 15s | LOA24.171B27 |
LMO24.113B2 | 230 | 2 | 〈30Kg | * | 5s | 15/16s | 10s | 15s | 3s | 15s | LOA24.173A27 |
LMO24.255B2 | 230 | 2 | 〈30Kg | * | 5s | 15/16s | 5s | 25s | 5s | 15s | |
For expanding steam ovens | |||||||||||
LMO24.011B2 | 230 | 2 | 〈30Kg | * | 5s | 15/16s | 10s | 15s | 10s | 15s | LOA24.571C27 |
For direct fired air heaters | |||||||||||
LMO44.255C2 | 230 | 2 | >30Kg | * | 5s | 15/16s | 5s | 25s | 5s | 5s | LOA44.252A27 |
tw waiting time t1 pre-purging time t3 pre-ignition time
Ignition time after t3n t4 Time interval from flame establishment to main valve opening
The following is the process you should take to complete your order through bank to bank transfer:
1. Please go to your bank (through online banking, ATM or going into a branch) and complete the transfer of money. Make sure that the amount you transfer is the exact total of your order. Payment details below:
- If your bank is located in Austria, Germany, Spain, France, United Kingdom, Italy, Netherlands, Belgium, Finland, Greece or Luxemburg you will pay to our WorldPay bank. You will see the bank details once you have placed the order.
PLEASE NOTE: If you are paying to our WorldPay bank you MUST include the Unique Payment Reference Number (you will receive this directly after paying the order) in the description section when completing payment to help us identify your order. Failure to do this will result in an unsuccessful transaction.
- If your bank is located in a country not listed above you will pay to our HSBC account. The details are below:
Bank Account:
Bank Code:
Beneficiary:
Bank Name:
Bank Address:
SWIFT Code:
PLEASE NOTE: If you are paying in this way you MUST write your Yourname order number in the description section when paying so we can easily recognize your payment. Failure to do this will result in a delayed or failed transaction.
2. When this is done, log in to your Yourname ‘My Account’ and complete the following:
Click ‘Order list’
Click ‘Pay’
Click ‘Complete Payment’ and fill in the related information for verification (This is an important step. If the information you have filled in does not match your bank details the payment can not be completed.)
Click ‘Submit’ to finish the procedure.
3. You will receive a payment confirmation email from us after your order’s payment has gone through successfully. If you do not receive this email, please contact us here: http://www.Yourname.com/help/
Please note that Yourname will begin to handle your items after payment has been cleared.
The tailoring and handling time is the number of business days we will take to process your items before shipping them. This processing includes order verification, item manufacturing, quality checking and packaging. This does not include the shipping time.
Different items and categories have different tailoring and handling times. However, on each item page the information is displayed next to the item photo as shown in the picture below.