Hi, Sign in
My Order
This product was successfully added to cart!
High pressure regulator BN 627 Series direct operated pressure regulators are suitable for high and low pressure systems
Shipping: International shipping available
Shipping time: Standar(10-20 business days), Rush(5-10 business days)
Discount: Get 2% discount on orders of USD $100.00,Get 3% discount on orders of USD $200.00
Handling time: Ships within 3 business days after receiving cleared payment
Returns: 7 days money back guaratee,buyer pays return shipping
Product Detail
Customer Reviews
Shipping Guide
Delivery Time
Product Tags
High pressure regulator BN 627 Series direct operated pressure regulators are suitable for high and low pressure systems
Application
BN 627 series direct operated pressure regulators are suitable for high and low pressure systems. These regulators can be used in natural gas, air or various other non corrosive gases. Direct operated pressure relief regulator with guide tube for greater regulation.
parameter
| Model | Caliber | Max.inlet pressure | outlet pressure | Flow |
| BN627-15 | RP1/2″ | l6bar(7-8bar) | 0.5-3.5bar | 180m3(Air) |
| BN627-25 | Rp1″ | l6bar(7-8bar) | 0.5-3.5bar | 300m3(Air) |
| BN627-40 | RP1/2″ | l6bar(7-8bar) | 0.5-3.5bar | 400m3(Air) |
| BN627-50 | Rp1″ | l6bar(7-8bar) | 0.5-3.5bar | 500m3(Air) |
Material
Valve body: Aluminum alloy
Valve cover : Aluminum alloy
Spring : Steel
Diaphragm : Synthetic rubber
Valve base : High temperature elastic composition
Setting
The allowable pressure setting range is indicated on the nameplate. If a pressure setting outside this range is required, use a suitable regulator to control the spring. Change the nameplate to indicate the new pressure range.
Refer to key number locations above
1. Remove the adjusting nut (Part No. 36).
2. Loosen jam nut (Part 34).
3. Turn adjusting screw clockwise (Part No. turns adjusting screw to reduce outlet pressure setting).
4. After obtaining the required pressure, secure the adjusting screw (Part No. 35) in place and tighten the jam nut (Part No. 34)
Installation
Regulator operation within the rating does not exclude the possibility of debris damage in the line or from external sources. In case of any overpressure, check the regulator regularly for damage.
1. For regulators shipped separately, make sure there is no damage or foreign matter in the regulators.
2. Ensure that all pipes and pipes are free of foreign debris.
3. As long as the flow direction through the valve body is consistent with the direction indicated by the arrow projected on the valve body, the regulator can be installed at any position.
4. If continuous operation is required during inspection or maintenance, install tee bypass around the regulator
Start-up
To avoid personal injury or property damage due to explosionor damage of regulator or downstream components during startup, release downstream pressure to prevent overpressure on regulator diaphragm. To avoid overpressure and possible equipment damage, the pressure gauge should always be used to monitor the pressure during start-up.
1. Slowly open the upstream stop valve
2. Slowly open the downstream stop valve
3. Check all connections for leaks
4. Adjust the final control spring according to the adjustment procedure
Shut down
1. Close the upstream stop valve closest to the regulator.
2. Close the downstream stop valve closest to the regulator.
3. Open the exhaust valve between the regulator and the downstream stop valve closest to it.
4. For type 627 regulators, the regulator will open to relieve the pressure between the upstream stop valve and the regulator.
The following is the process you should take to complete your order through bank to bank transfer:
1. Please go to your bank (through online banking, ATM or going into a branch) and complete the transfer of money. Make sure that the amount you transfer is the exact total of your order. Payment details below:
- If your bank is located in Austria, Germany, Spain, France, United Kingdom, Italy, Netherlands, Belgium, Finland, Greece or Luxemburg you will pay to our WorldPay bank. You will see the bank details once you have placed the order.
PLEASE NOTE: If you are paying to our WorldPay bank you MUST include the Unique Payment Reference Number (you will receive this directly after paying the order) in the description section when completing payment to help us identify your order. Failure to do this will result in an unsuccessful transaction.
- If your bank is located in a country not listed above you will pay to our HSBC account. The details are below:
Bank Account:
Bank Code:
Beneficiary:
Bank Name:
Bank Address:
SWIFT Code:
PLEASE NOTE: If you are paying in this way you MUST write your Yourname order number in the description section when paying so we can easily recognize your payment. Failure to do this will result in a delayed or failed transaction.
2. When this is done, log in to your Yourname ‘My Account’ and complete the following:
Click ‘Order list’
Click ‘Pay’
Click ‘Complete Payment’ and fill in the related information for verification (This is an important step. If the information you have filled in does not match your bank details the payment can not be completed.)
Click ‘Submit’ to finish the procedure.
3. You will receive a payment confirmation email from us after your order’s payment has gone through successfully. If you do not receive this email, please contact us here: http://www.Yourname.com/help/
Please note that Yourname will begin to handle your items after payment has been cleared.
The tailoring and handling time is the number of business days we will take to process your items before shipping them. This processing includes order verification, item manufacturing, quality checking and packaging. This does not include the shipping time.
Different items and categories have different tailoring and handling times. However, on each item page the information is displayed next to the item photo as shown in the picture below.
High pressure regulator BN 597-8 Improve capac...
RTZ – * / 1.6xg series gas pressure regul...
Globe valve
